There were 28 fatalities worldwide involving mobile elevating work platforms (MEWPs), also known as aerial work platforms (AWPs), in the first half of 2013, according to findings from IPAF’s accident database.
The
main causes of these fatalities were overturn (10), fall from height (9),
entrapment (5), electrocution (3), and impact with MEWP (1). Thirteen
of the fatalities involved booms (3b), 10 involved scissor lifts (3a), and three
involved vehicle mounts (1b). In two cases, the machine type was unknown.
Of
these fatalities, 13 occurred in the United States, two each in France, Germany, the
Netherlands and the United Kingdom, and one each in Armenia, Canada, Ireland, Malaysia,
Norway, Spain and the UAE.
While
releasing these findings, IPAF also updated the 2012 preliminary results
following the reporting of a previously unrecorded fatal accident in Canada in
October 2012. This brings the total fatalities in 2012 to 32, instead of the 31
initially reported.
Compared
with the first half of 2012, which saw 17 fatalities reported, the number of
fatalities reported for the first half of 2013 has increased by about 65 percent. IPAF
believes that the accident reporting project is capturing more data, not
necessarily that there are more accidents.
While
the main causes of fatalities were fairly evenly spread in the first half of
2012, the first half of 2013 saw a rise in the number of fatalities resulting
from overturn and fall from height. The fatalities in the first half of 2012
involved more booms (3b) and vehicle mounts (1b). Those in the first half of
2013 involved more booms (3b) and scissor lifts (3a).
“Findings
from IPAF’s rental market reports lead us to estimate that there are more than
one million MEWPs in the world,” says IPAF CEO Tim Whiteman. “Every fatality is
one too many, but these figures show that powered access equipment remains a
safe way to carry out temporary work at height.”
“The
accuracy of the data relies upon those using MEWPs and other interested parties
to report any known fatal accidents to IPAF at www.ipaf.org/accident or to an IPAF
member of staff,” says IPAF technical officer Chris Wraith. “The comprehensiveness
of the data cannot be guaranteed, but where appropriate, action is taken to
verify the facts. The data is updated should relevant information become
available.”
IPAF’s
accident data is based on information collected in a number of ways: directly
reported to the IPAF accident database at www.ipaf.org/accident,
information obtained by IPAF staff worldwide, and information collated from
press releases and news reports.
All
manufacturers, rental companies, contractors and users are encouraged to report
any known fatal and serious accidents involving mobile elevating work platforms
(MEWPs) and mast climbing work platforms (MCWPs) worldwide at the IPAF accident
database. The project is open to IPAF members and non-members, and includes an
option for anonymous reporting.
All
data collected is confidential and none of the detail of any accident is shared
with third parties or disclosed to safety authorities unless required to by
legal writ. The only exception to this is that manufacturers will be given
basic data if a machine manufactured by their company is involved in a fatal
accident.
To
register and to report an accident involving a MEWP or an MCWP, go to www.ipaf.org/accident.
No comments:
Post a Comment