CalStar Products has released an Environmental Product Declaration (EPD) of its brick, which details the results of an intensive, months-long life cycle assessment (LCA) conducted by architecture firm Perkins+Will. The LCA verifies the significant environmental benefits of the company’s non-fired brick. The EPD is the first to be published within the brick category and is one of only a handful currently available in the greater building products industry.
Data from the life cycle assessment show the cradle-to-gate (raw material extraction and transportation, and manufacturing) CO2 emissions for a single CalStar brick to be 0.13 pound, versus 0.81 pound for a single clay brick (as noted in the NIST BEES Online database). For cradle-to-gate embodied energy, the LCA shows that a single CalStar brick requires 1,203 BTU of energy vs. the 6,251 BTU the traditional process requires. Based on these data, CalStar bricks deliver an 84% lower carbon footprint and use 81% less manufacturing energy, with similar aesthetics and performance as traditional fired clay bricks.
“Traditional bricks are beautiful and durable, and now we’ve made them more sustainable,” says Joel
Rood, CalStar Products CEO. “CalStar’s mission of reducing the environmental impact of building
products can only be quantified with third-party-verified, completely transparent product benchmarking. This is why we made this project a top priority. The results of the LCA confirm that selecting CalStar over traditional options contributes to quantifiable reduction in a project’s environmental footprint.”
CalStar Products achieves these savings through a proprietary manufacturing process that incorporates fly ash, rather than clay, as the binder. This replacement eliminates the need for firing: CalStar bricks are cured overnight at temperatures below 200° F, while clay bricks are fired for up to four days at temperatures reaching 2,000° F. Along with energy savings and emissions reduction, each CalStar brick incorporates 37% recycled content, diverting tons of waste from landfills each year.
Since introducing its first commercial products in 2010, CalStar has noted its masonry products’ energy and emissions savings as a method for reducing the significant environmental impact of manufacturing building products. “In keeping with CalStar’s commitment to transparency and sustainable product leadership, a life cycle assessment was the next logical step for us,” said VP of engineering Julie Rapoport, Ph.D., PE, LEED AP.
The CalStar life cycle assessment was performed by Perkins+Will using data sets from GaBi 5.0
software. The resulting EPD was verified under the SMaRT Certified rating system operated by the
Institute for Market Transformation to Sustainability (MTS), an EPD program operator.
“By analyzing the entire CalStar brick production process from cradle-to-grave—that is, from the
acquisition of fly ash and other raw materials through manufacture, delivery to jobsite, construction and use, and end-of-life—we were able to measure CalStar’s environmental contributions in each life cycle phase,” says Doug Pierce, senior associate at Perkins+Will. “Making truly informed decisions about green materials can be difficult without quantifiable product benchmarks, and LCAs, when coupled with other indicators and metrics, can help provide those vital benchmarks allowing the
sustainable building industry to progress. CalStar is on the leading edge of this burgeoning trend.”
The results of CalStar’s life cycle assessment are shown in the charts below. To read the full CalStar
Products Environmental Product Declaration, visit www.calstarproducts.com/epd.
No comments:
Post a Comment